|
In road transport, an oversize load (or overweight load) is a load that exceeds the standard or ordinary legal size and/or weight limits for a specified portion of road, highway or other transport infrastructure, such as air freight or water freight. There are also load per axle limits. However, a load that exceeds the per-axle limits, but not the overall weight limits, is considered overweight. Examples of oversize/overweight loads include construction machines (cranes, front loaders, backhoes, etc.), pre-built homes, containers, construction elements (bridge beams, generators, windmill propellers, rocket stages, industrial equipment). The legal dimensions and weights vary between countries and regions within a country. A vehicle which exceeds the legal dimensions usually requires a special permit which requires extra fees to be paid in order for the oversize/overweight vehicle to legally travel on the roadways. The permit usually specifies a route the load must follow as well as the dates and times during which the load may travel. ==International perspectives== In a specific country the roads are built in a way that allows a vehicle with dimensions within the standard legal limits to safely (though not necessarily easily) drive and turn. Roads that do not allow large vehicles may be marked with the traffic signs. These may include per-axle load, height, width, or overall length limits. In the United States an oversize load is a vehicle and/or load that is wider than . Each individual state has different requirements regarding height and length (most states are tall), and a driver must purchase a permit for each state he/she will be traveling through. In many states, a load must be considered "nondivisible" to qualify for a permit (e.g., an object which cannot be broken down into smaller pieces), although some states allow divisible loads to be granted permits.〔(【引用サイトリンク】title=Oversize and Overweight Load Permit Information )〕 In New Zealand, an oversize load is a vehicle and/or load that is wider than or higher than . Overlength limits vary depending on the type and the configuration of vehicle, but the overall maximum forward distance (i.e. the length from the front of the vehicle to the centre axis of the rear axle set) is , the overall maximum single vehicle length is (some buses can be longer), and the overall maximum combination length is . Loads must be indivisible, except when the vehicle is oversize itself where it can carry divisible loads as long as the divisible load fits within the standard load limits. Permits are not required for oversize vehicles which are under long, under high, and fit within a set combination of width and forward distance; but they must comply with certain rules regarding piloting, travel times and obstructions. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Oversize load」の詳細全文を読む スポンサード リンク
|